€27
4d agoPlastic Operator
This job was originally posted in Spanish and automatically translated to English. You'll most likely need Spanish to apply.
Requirements
- Minimum of 4 months of experience in a position equal or similar to the one described. - We are looking for a dynamic and responsible person.- Residence close to the workplace is valued.
Completed ESO or equivalent.
Correctly spoken and written Spanish and/or Catalan.
Job Description
A company in the plastics sector is looking for a Plastic Operator to join them in the Sant Jaume de Llierca area. The selected person will perform the following functions:
- Remove plastic parts from the injectors.
- Fit and check for possible defects in the plastic parts.
- Deburr and perform finishing and assembly on the plastic parts.
- Place the parts inside the boxes and label parts and/or boxes.
- Add additive material to the injectors.
- Digitally record the work performed.
- Among other functions inherent to the job position.
- Remove plastic parts from the injectors.
- Fit and check for possible defects in the plastic parts.
- Deburr and perform finishing and assembly on the plastic parts.
- Place the parts inside the boxes and label parts and/or boxes.
- Add additive material to the injectors.
- Digitally record the work performed.
- Among other functions inherent to the job position.
View original advert (Spanish)
Empresa dedica al sector plástico búsqueda un/a Operario/a plástico/a para incorporar en la zona de Sant Jaume de Llierca. La persona seleccionada desarrollará las siguientes funciones:
- Sacar piezas de plástico de los inyectores.
- Encajar y revisar los posibles defectos de las piezas de plástico.
- Rebabar y hacer acabados y montajes a las piezas de plástico.
- Colocar las piezas dentro de las cajas y etiquetar piezas y/o cajas.
- Añadir material aditivo a los inyectores.
- Registrar informaticamente el trabajo realizado.
- Entre otras funciones propias del puesto de trabajo.
- Sacar piezas de plástico de los inyectores.
- Encajar y revisar los posibles defectos de las piezas de plástico.
- Rebabar y hacer acabados y montajes a las piezas de plástico.
- Colocar las piezas dentro de las cajas y etiquetar piezas y/o cajas.
- Añadir material aditivo a los inyectores.
- Registrar informaticamente el trabajo realizado.
- Entre otras funciones propias del puesto de trabajo.