Laboratory Technician (Quality Control)

-Minimum 1-2 years of experience performing similar functions.

We offer:

-Contract: 3 months via ETT + extendable up to 18 months

-Annual salary: €23,561.31 gross/year

-Schedule: Monday to Friday.

Morning shift 6:30h to 14:30h.

Afternoon shift 14:00h to 22:00h.

A multinational company in the industrial sector, located in Alcobendas, is looking for a Quality Control Laboratory Technician.

Perform the necessary physical-chemical tests and keep the appropriate records to check and maintain the quality of the finished product, intermediate products, raw materials, packaging, and containers, according to the established specifications.

Randomly monitor the manufacturing process and the packaging and labeling process.

1.      Inspection for the approval or rejection of raw materials, containers, and packaging used in product manufacturing.

               Inspection of intermediate and finished products during manufacturing by carrying out all physical-chemical tests and/or analyses established in the process instructions.

2.      Updating the quality records defined in the process instructions and specifications for raw materials, intermediate products, and finished products.

               - Recording 100% of the information required by the process instructions and/or the specifications of each material.

3.      Executing the chemical analyses and laboratory tests required by other areas for the quality control department.

               - Execution and delivery of the results report for 100% of the analyses within a maximum time of 3 business days in addition to the time required for the analysis.

4.      Keeping the retention samples of each material during the process in order and stored in the sample room according to their specifications.

               - Laboratory without samples unrelated to the processes being manufactured, without unused equipment, or materials unrelated to the laboratory.

5.      Environmental Management System (EMS) and Quality Management System (QMS) procedures and practices.

               - Complying with all EMS and QMS procedures and practices.

6.      Safety and hygiene practices.

               - Zero accidents.

8.   Rejecting Raw Material that does not meet specifications.

9.   Stopping production processes for failing to meet their specifications, or if an equipment failure is detected that puts the product or the safety of personnel or equipment at risk.

10. Rejecting products that do not meet the established specifications.

There are two positions that, in addition to the detailed functions, are responsible for:

1.- Performing tests for product certification compliance (CE Marking, DIT, DAU, etc…).

2.- Document management / Audits (CE Marking, DIT, DAU, etc…).

3.- Performing equipment metrology (including calibrations, repairs, and setup of equipment for the Alc QC lab).

4.- Issuing and sending certificates of analysis and conformity for products manufactured in the different factories.