Press Operators (4th Shift)

Currently, from the Terrassa delegation, we are looking for PRESS OPERATORS for Terrassa, Barcelona.

1. Give the OK to the assembly of the manufactured process, checking the assigned parts following the defined work method.

2. Start up the machine, mount the coil on the unwinder, and adjust parameters if required, as well as perform the necessary coil changes during the manufacturing process; start up the compactor and/or mount, adjust, and load the destacker.

3. Review the process folder and notify the person in charge of any update, error, or anomaly detected, and register the incident in QPlant.

4. Manufacture the assigned parts following the operating method (signing the training record, control plan knowing the defects of the part to be manufactured, packaging instructions knowing the arrangement of the parts in the container,...).

5. Perform the first-level TPMs established in the process.

6. Assist any action by the tooling workshop or maintenance to provide support during the incident if necessary.

7. Review 100% of the manufactured parts following the control plan and the established criteria. Remove defective parts detected from the flow, update the defective parts panel, and replace the rejected part.

8. Rework the assigned parts following the defined work method.

9. Report in Qplant the tasks assigned during the working day and the defective parts every hour.

10. Place the parts in the defined container, or on the table if the process specifies it, following the guidelines established for each part; and clean the workstation at the end of a manufacturing order, at the end of the working shift, or during any incident in which support does not have to be given to the department involved.